日本語A&M GROUP Official SiteProfessional AI Multi-AgentSound Engine DOMEarEffect

Support — Prototype

Before development,
we verify the effect using actual data.

We do not stop at desk-based proposals. We build prototypes with real data, compare AI and human judgments, and verify accuracy and impact with figures.

Prototype
Prototype on real data
Verification
Cross-checking AI and human judgments
Decision
Basis for the decision on full-scale development

When

In situations like these

Not knowing how accurate it is

You want to confirm that AI can really do it before deciding. We build a prototype with your actual data, compare the judgments of AI and your staff, and verify the accuracy in numbers.

  • We don't know how many errors will occur
  • Unable to judge whether it can withstand real operations

You want to win over people inside the company

You want to show management and the front line the impact. Instead of a proposal document, we can show you something working on real data along with the results of reconciliation, so both management and the front line can make decisions from the same material.

  • We want to show results with figures
  • Wanting to address concerns

Want to start small

You want to test within a limited scope before making a large investment. We narrow down the questions you want to answer and prototype only the core functions. Once you have seen the results, you can decide the scope of full development.

  • We want to try it on one operation first
  • Want to reduce the cost of failure

What we do

What We Provide

Prototype on real data

We prototype the AI mechanism using real business data. Because we use real operational data rather than samples, even the exceptions and notation variations that occur in actual operation become visible at the prototype stage.

  • Deciding the target tasks and scope
  • Data readiness
  • Building a prototype

Comparison of AI and human judgments

The AI and a staff member each judge the same cases, and the results are compared across all cases. By comparing every case rather than a sampled portion, we show in numbers the range that can be left to the AI.

  • Designing the reconciliation procedure
  • Tallying matches and mismatches
  • Evaluation Metrics

Report of the reasons for mismatches

We classify the reasons for discrepancies and assess whether they can be fixed. We sort discrepancies into those that can be resolved by revising instructions, those that require data preparation, and those that need human judgment, and we set out the remedy for each.

  • Analysis of error trends
  • Proposed ways to correct
  • Scope and effort of full-scale development

In depth

You can make your decision based on a prototype running on real data,
not on a proposal document.

The effect of AI cannot be measured by explanations on paper. Even with the same mechanism, accuracy and the reduction in effort change greatly when it runs on the client's actual documents and decision criteria. What should be confirmed before full development is the result on real data.

We build a prototype with real data and compare the AI's judgments with the staff's judgments for every case. For each mismatch, we trace the reason and report whether it can be solved by revising the AI's instructions, whether the data needs to be improved, or whether it is work that a person should decide.

You can decide whether to proceed to full-scale development based on those figures. In determining staffing for professional roles, we compared the AI's judgments with the staff members' judgments for every case and compiled the reasons for any differences into a report. This thorough comparison is the foundation that lets people on the front line use AI with confidence.

Case study

Case Study

We present the flow and the finished form in the form of reports. Each one states clearly whether it is based on our actual operations or is an example assumed from how such work is normally done.

The AI's judgments are compared against the person in charge's judgments, for every case.
Example based on our own operating experience

Validation through prototyping

We compare the AI's judgments with the staff's judgments,
for every case.

This is an example from our contract development work. The client wanted to confirm with real data, rather than a proposal document, whether AI could be trusted with judgments before deciding on full-scale development.

  1. Receive the actual data and the judgments the staff have already made
  2. Build a prototype to the requirements and have the AI make the same judgments
  3. Compare the judgments of AI and staff across all cases
  4. Trace the cause of each discrepancy, one by one
  5. Compile the material needed to decide on moving to full-scale development

ReportReport for this case

Flow
Proceed in this order: real data → prototype → full reconciliation of all items → reasons for discrepancies → material for decision-making.
Deliverables
  • Compared AI judgments with staff judgments for every case, and compiled even the reasons for discrepancies into a report
  • Sorting issues into those fixed by revising instructions, those requiring data preparation, and those requiring human judgment
  • Plan for full-scale development
Points to confirm
  • Can every reason for a mismatch be explained?
  • Does it give the people on site grounds to trust the AI's judgments?
  • Whether you can decide on full-scale development based on figures
We handed over the task only after comparing the AI's judgments with the executives' judgments.
Example based on our own operating experience

Verification of bid judgments

We checked the AI's judgments against the executives' decisions
before handing the work over.

This is an example from our own company. Before entrusting AI with the decision of whether to participate in or pass on each bid notice, we compared it with our executives' past decisions and checked how much could be delegated.

  1. Collect executives' past decisions together with their reasons
  2. Have AI assess the same public notice
  3. Compare differences in assessments one case at a time
  4. Rewrite the judgment logic based on the reasons for the differences

ReportReport for this case

Flow
Collect past decisions → AI judgment → cross-check → rewrite the reasoning, and repeat this cycle before handing the work over.
Deliverables
  • Results of cross-checking assessments
  • The revised approach to judgment
  • What to delegate, and the decisions reserved for executives
Points to confirm
  • Can every reason for the difference be explained?
  • Is AI replacing executive decisions?
  • Whether changes to the approach are recorded
We verify the accuracy of invoice reading using your actual invoices.
Example based on typical ways of working

Verifying reading accuracy

We verify the accuracy of invoice reading
with actual invoices.

In the accounting department, invoices in a different format for each supplier are entered by hand. We want to confirm how far AI reading can be used before introducing it.

  1. Collect actual invoices, grouped by format type
  2. Have the AI read the materials and produce results item by item
  3. Cross-check every record against the entries made by the person in charge
  4. Summarize the reasons for misreadings by form type

ReportReport for this case

Flow
We proceed in this order: collecting invoices → AI reading → matching every record → summarizing the reasons → deciding whether to adopt.
Deliverables
  • Reading results for each form
  • List of reasons for misreadings
  • Scope and assumptions of adoption
Points to confirm
  • Whether accuracy differs by form
  • Whether amounts and dates are read correctly
  • Whether the design keeps a step where a person verifies

Prototype

We confirm even why the AI and the human judgments differed
before moving on to the next stage.

We look beyond the match rate, checking the reason for each discrepancy one by one and assessing whether it can be fixed.

Deliverables

What we deliver

  1. How prototyping works

    A prototype that runs on real data. You can try the same prototype we used for verification as it is. In full development, we build on this prototype.

  2. Reconciliation report

    Agreement between AI and human judgments, and the reasons for any disagreement. This is a report that gives not only the number of matches but also a reason for each case that did not match.

  3. Basis for the decision on full-scale development

    Scope, effort, assumptions, and a proposed approach. Based on the results of the comparison, we present the scope, effort, and assumptions for the full development, giving you the material to decide whether to proceed.

Process

How to proceed

  1. Define the question

    We decide what must be confirmed for the project to count as a success. We decide at the outset what must be confirmed before moving on to full development. Once the question is set, the scope of the prototype is set as well.

  2. Data readiness

    We collect real data and prepare it in a form usable for the prototype. After collecting the data and deciding how personal information will be handled, we prepare it for prototype use.

  3. Prototyping

    We prototype the core functions. We build only the core functions needed for the question we want to answer, and run them in a short period.

  4. Reconciliation

    We compare AI and human judgments across all cases. AI and your staff judge the same cases, we compare them across all cases, and we trace the reasons for any differences.

  5. Reporting

    We will report the results and how to proceed if you move to full development. We will compile the results together with the scope, effort, and approach for full development.

Estimate

What Determines the Cost

We prepare a quote after asking about the following points. With the AI quote, the AI asks about the same points in turn.

  1. Questions to verify

    The number and difficulty of the questions to be verified. The more questions there are, and the harder they are, the wider the scope of the prototype.

  2. Data volume

    The types and volume of real data used. The more types of data there are, the more effort is needed to prepare it.

  3. Scope of reconciliation

    The number of cases in which AI and human judgments are compared. The more cases compared, the more reliable the result, and the more effort it takes.

  4. Period and structure

    The verification period and the number of people involved. It varies with the length of the verification period and the number of people who help with the evaluation.

Why A&M GROUP

The engineer who receives your inquiry will go on to handle the development.

  1. There are no handovers between staff members.

    The engineer who did the interviewing designs and implements the system directly. Requirements do not drift through back-and-forth specification documents.

  2. We operate them every day in our own business

    We actually operate 8 AI systems that do the work of several thousand people in our own business, including the multi-agent system that oversees the operation of the entire business. Our advice comes from experience of running them, not from proposals on paper.

  3. We propose the suitable method, not only AI

    Where AI is not needed, we will tell you so. If an off-the-shelf tool is enough, we will propose that approach as well.

  4. We also handle operation and improvement after delivery.

    We run it in actual operation and take responsibility through to detecting faults and continuing to fix them. We operate our own 8 AI systems under this structure every day.

Operating scale — from system logs

AI that carries the work of thousands of people,
operated every day in our own business.

Every proposal is a method we have run and verified in-house. Our AI processes every day a volume of work that would require multiple departments if handled manually.

approx. 100,000cases/day

Checks bid notices published by government agencies and others 4 times every day, with AI judging deadlines, participation conditions, and fit with our company

1,108cases

Bidding projects whose deadlines and progress are managed by AI

4,084items

Orders, inventory, pricing, advertising, and finance on one platform

86functions

In-house system functions that can be run directly from AI assistants

8systems

AI systems we actually run in our own business

Values retrieved from each system's records (as of November 9, 2026). "Thousands of people" is a figure we calculated: we converted this workload into the effort it would take people to process it with the same tasks, and took the number of people needed to finish it within twenty-four hours. It is not a measurement by a third party.

View the workload breakdown

Contact

Please contact us about verification through prototyping.

Choose a contact point and describe your request. Together with our AI guide, we will organize the details and prepare a rough estimate on the spot.

Request a quote for this plan