日本語A&M GROUP Official SiteProfessional AI Multi-AgentSound Engine DOMEarEffect

Brand — Marian

Marian

A digital audio manufacturer based in Leipzig, Germany. For more than 25 years, it has developed PCIe audio interfaces that are installed inside computers. Its products are made in Germany. In Japan, A&M INVESTMENT INC. imports and sells them.

Country
Germany
Category
Audio Interfaces
Importer
A&M INVESTMENT INC.

Lineup

PCIe Audio System

Digital Systems

An interface card that supports AES/EBU, Dante and MADI. It is used in broadcast and recording settings to exchange digital audio across many channels.

  • SERAPH M2 supports both 56ch and 64ch modes of MADI
  • A high-quality sample rate converter on the input

Analog Systems

An interface card with 8 channels of analog input and output via XLR/TRS.

  • Up to 384kHz and 32bit, with 24dBu balanced connections
  • Select an XLR or TRS connection

Digital & Analog Systems

An interface card with input and output for XLR/TRS analog signals and AES/EBU digital signals.

  • SERAPH and CLARA Series

Technology

Technology

  1. Clock

    The jitter of the CLARA series is 1 ns or less. Even with external sync, the PLL circuit conditions the clock.

  2. TDM SyncBus

    Connect up to 8 units of sound systems within a single computer and synchronize them completely.

  3. DSP mixer BEAST

    A zero-latency DSP mixer for the SERAPH and CLARA series. With up to 64 ch, each channel has a full parametric EQ.

  4. Word Clock Expansion MWX

    Separately from the internal clock and digital connections, the clock can be set through the WordClock / Super Clock inputs and outputs.

  5. Driver

    Supports ASIO, MME and multichannel WDM/WASAPI, and is optimized for stability and low latency. MIDI input and output are also provided.

Where to buy

Place of purchase

A&M INVESTMENT INC.
We import and sell these products. Specifications, prices and lead times are handled through inquiries.

Case study

Case Study

We present the flow and the finished form in the form of reports. Each one states clearly whether it is based on our actual operations or is an example assumed from how such work is normally done.

Setting up a multi-channel recording environment on a computer
Example based on typical ways of working

Multichannel recording

Building a multichannel recording environment on a computer

In a recording studio, you want to bring many channels into the computer, but your current interface does not provide enough.

  1. Ask about the number of channels to record and the equipment to connect
  2. Select the card to install in the PC
  3. Integrate it and configure it
  4. Verify with a recording

ReportReport for this case

Flow
We proceed in this order: listening → selection → integration → checking.
Deliverables
  • A card that matches the number of channels
  • Integration and configuration
  • Check
Points to confirm
  • Did we record the channels we needed?
  • Whether it suits your computer and equipment
  • Does it run stably?
Transmitting digital audio between equipment in broadcast and streaming workplaces
Example based on typical ways of working

Digital audio transmission

Transmission of digital audio between equipment at broadcast and streaming sites

We want to build a configuration in which digital audio is exchanged between equipment at broadcast and streaming sites.

  1. Ask about the equipment to be connected and the transmission method
  2. Choose the card that suits the method
  3. Integrate it and configure it
  4. Verify the transmission

ReportReport for this case

Flow
We proceed in this order: listening → selection → integration → checking.
Deliverables
  • Cards that match the type
  • Setup
  • Check
Points to confirm
  • Whether the type is suitable
  • Can it transmit stably?
  • Can it be combined with the equipment?
Our work as the importer of Marian, from import through to warranty
Example based on our own operating experience

As the importer of Marian

Our work as the importer of Marian, from import to warranty

Here is an example from our own operations. To bring Marian products to customers and dealers in Japan, we handle import, inventory, sales and warranty as one continuous process.

  1. Agree on terms with the manufacturer and for sales in Japan
  2. Prepare Japanese product information and pricing
  3. Hold inventory and deliver it to retailers and online sales channels
  4. We also answer questions about usage, as the importer

ReportReport for this case

Flow
We handle import → inventory → sales → warranty as one continuous flow.
Deliverables
  • Product information in Japanese
  • Availability at retailers and online stores
  • Warranty and repair contact
Points to confirm
  • Whether sales are being halted because of stockouts
  • Is the product information up to date?
  • Whether warranty requests are honored promptly

Contact

Audio Interface Inquiries

We accept inquiries about product specifications, pricing, lead times, and demonstrations.

Inquiries About Exclusive Import Distribution Products