日本語A&M GROUP Official SiteProfessional AI Multi-AgentSound Engine DOMEarEffect

Brand — Hum Audio Devices

Hum Audio Devices

A Polish microphone manufacturer. It makes ribbon microphones created by sound engineers, for sound engineers. In Japan, A&M INVESTMENT INC. imports and sells them as the exclusive distributor in Japan.

Country
Poland
Category
Ribbon microphone
Importer
A&M INVESTMENT INC.

Ribbon

RS-2 Ribbon Recording System

A stereo ribbon microphone recording system that delivers depth and detail in sound, in addition to the sound of a traditional ribbon microphone. A high-quality microphone preamp is built into the microphone body, and all functions can be operated through a single XLR cable.

Features

Main features of the RS-2

  1. Active and passive

    Switch between active and passive operation. You can choose the mode to suit the sound you are recording and the equipment you connect.

  2. Built-in microphone preamp

    A discrete Class-A microphone preamp is built into the unit. Because the signal is boosted right behind the microphone, recordings have little noise.

  3. Ribbon

    It uses a proprietary ribbon made of 1.8-micron aluminum foil. It captures the smooth sound characteristic of a ribbon microphone.

  4. Low-cut and air boost

    Equipped with a low-cut filter (50Hz, 80Hz, 120Hz) and an air boost that lifts the high range smoothly.

  5. M/S Matrix

    A transformer-based M/S matrix and a rotating microphone head let you switch quickly between L/R and M/S.

  6. Components and signal path

    Lundahl mic and line output transformers, a short signal path, and a design that uses no electrolytic capacitors in the signal path.

Where to buy

Place of purchase

A&M INVESTMENT INC.
We import and sell as the exclusive distributor for Japan. Inquiries about specifications, pricing, lead times, and demos are accepted through the contact form.

Case study

Case Study

We present the flow and the finished form in the form of reports. Each one states clearly whether it is based on our actual operations or is an example assumed from how such work is normally done.

Recording vocals with a ribbon microphone
Example based on typical ways of working

Voice recording

Recording vocals with a ribbon microphone

People who record singing or narration are looking for a microphone that captures the voice smoothly.

  1. Ask about the voice to be recorded and the room
  2. Verify the switching of operations and the equipment to connect
  3. Decide where to place it
  4. Record and check

ReportReport for this case

Flow
We proceed in this order: listening → checking → placement → recording.
Deliverables
  • Combinations of equipment to connect with microphones
  • Placement position
  • Check
Points to confirm
  • Does it suit the voice?
  • Whether It Matches the Connected Equipment
  • Whether the recording was made with little noise
Adding a ribbon microphone to instrument recording
Example based on typical ways of working

Instrument recording

Adding a ribbon microphone to instrument recordings

In a studio that records instruments, we want to be able to choose the sound of a ribbon microphone in addition to the microphones we use now.

  1. Ask about the instrument to be recorded and the current microphone
  2. Verify the operation and the equipment to connect
  3. Decide where to place it
  4. Record and compare

ReportReport for this case

Flow
We proceed in this order: listening → checking → placement → recording comparison.
Deliverables
  • Microphone combinations
  • Placement position
  • Recording comparison
Points to confirm
  • Is it suited to the instrument?
  • Can it be used alongside your current microphones?
  • Whether you could confirm the differences through a recording comparison
Our work as the importer of Hum Audio Devices, from import through to warranty
Example based on our own operating experience

As the importer of Hum Audio Devices

Our work as the importer of Hum Audio Devices, from import to warranty

Here is an example from our own operations. To bring Hum Audio Devices products to customers and dealers in Japan, we handle import, inventory, sales and warranty as one continuous process.

  1. Agree on terms with the manufacturer and for sales in Japan
  2. Prepare Japanese product information and pricing
  3. Hold inventory and deliver it to retailers and online sales channels
  4. As the exclusive distributor in Japan, respond to inquiries about adoption

ReportReport for this case

Flow
We handle import → inventory → sales → warranty as one continuous flow.
Deliverables
  • Product information in Japanese
  • Availability at retailers and online stores
  • Warranty and repair contact
Points to confirm
  • Whether sales are being halted because of stockouts
  • Is the product information up to date?
  • Whether warranty requests are honored promptly

Contact

Microphone consultation

We accept inquiries about product specifications, pricing, lead times, and demonstrations.

Inquiries About Exclusive Import Distribution Products