日本語A&M GROUP Official SiteProfessional AI Multi-AgentSound Engine DOMEarEffect

Brand — Cordial

Cordial

A German manufacturer of cables for instruments and audio equipment. In Japan, A&M INVESTMENT INC. sells its products under exclusive sales rights in Japan.

Head office
Dachau, Germany (near Munich)
Independent
1995
Production
Germany, Europe, and China

Maker

About the manufacturer

Cordial began in the early 1990s as a division of Hermann Adam in Dachau. Since 1995 it has operated as an independent company, supplying cut-to-length cable (bulk cable) and finished cable assemblies to music stores and professional audio customers. Its products include instrument, microphone and speaker cables, multicore cables, adapters, and DMX, MIDI and digital audio cables. Production takes place at its headquarters in Germany, in Europe and in China.

Lineup

Categories and representative products

The product lines for each use, and representative products handled in Japan.

Instrument cables

Cables with standard mono plugs for connecting guitars, basses and electronic instruments to amplifiers. The range includes entry-level cables, stage-oriented cables, and cables made from materials that do not use PVC.

  • CII PP (entry-level; REAN Silver plugs, conductor cross-section 0.22mm²)
  • CRI PP (ROAD series; conductor cross-section 0.75 mm², NEUTRIK plug)
  • CSI PP-METAL (based on the CGK 175, 42 strands in the inner conductor, translucent jacket)
  • ECOHEMP PP (PVC-free TPE-V and hemp jacket, conductor cross-section 0.50 mm²)

Instrument cables with silentPLUG

A reed switch built into the plug cuts the signal only while the plug is being inserted or removed. Even if you swap instruments with the amp volume still turned up, there are no pops or hum noise.

  • CRI PP-SILENT (ROAD series)
  • CSI RP-METAL-SILENT (right-angle plug)
  • CXI PP-EDITION 25-SILENT (double textile jacket, conductor cross-section 0.50 mm²)

Microphone and line cables

Used for balanced XLR connections and for converting between XLR and standard plugs. It reliably connects microphones and equipment in recording and live settings.

  • CCM FM (female XLR to male XLR, 0.22mm² × 2 conductors, spiral shield with 90% coverage)
  • CFM FV (female XLR to 6.35mm standard stereo plug, balanced connection)
  • CPM FM (NEUTRIK connectors, transparent label tubes on both ends)

DJ and audio (RCA) cables

Twin cables for unbalanced connections of mixers, turntables, synthesizers, and similar equipment.

  • CEON DJ PLUG Y (standard plug to standard plug, oxygen-free copper conductor)
  • CEON DJ RCA Y (RCA to RCA)
  • CFU PC (standard plug to RCA, red and black color coding)

Multi-cable (D-Sub)

The pin assignment follows the TASCAM D-Sub 25-pin (DA-88) specification. It wires the analog inputs and outputs of multichannel AD/DA converters and recorders together.

  • CCFD DFT (D-Sub 25-pin to 8 female XLR)
  • CCFD DMT (D-Sub 25-pin to 8 male XLR)
  • CFD DVT (D-Sub 25-pin to 8 standard 6.3mm balanced plugs)
  • CFD DDA (D-Sub to D-Sub, with shielding for each pair and overall shielding)

MIDI Cable

Connects sound modules, MIDI controllers, keyboards, and USB interfaces.

  • CFD AA (5-pin DIN, REAN metal plugs, 0.22mm² × 2 conductors)

Data Transfer Cables

Used for transmitting video and audio and for connecting network equipment.

  • CHDMI 2PLUS (HDMI with Ethernet, 4K@50/60Hz, up to 18Gbit/s, HDCP 2.2, ARC and HEC)
  • CSE HH 5 (CAT 5e patch cable, HIROSE RJ45 connector)

Specifications

How It Is Built, by Specification

0.75mm²

Conductor cross-sectional area of the ROAD and CSI series

Instrument cables for the stage

0.50mm²

Conductor cross-sectional area of the EDITION and ECOHEMP series

Twice the cross-sectional area of conventional cloth-covered cable (as stated by the manufacturer)

42 strands

Number of strands in the inner conductor of the CSI PP-METAL

Construction for low resistance and easy bending

90%

Shield coverage of the ESSENTIALS series microphone cables

Spiral shield of bare copper wire

Construction

Plug and shield

  1. NEUTRIK and REAN Plugs

    We use plugs from NEUTRIK and from REAN, its more affordably priced line. ESSENTIALS-series products are hand-soldered, and the plugs can be opened for repair.

  2. ROAD plug

    Highly conductive pins that are partially gold-plated, and a housing insulated with green coating (Controlled Conductivity).

  3. Double shield

    The EDITION and ECOHEMP series use a double shield of braided shielding and conductive plastic to reduce the noise (microphonics) produced when the cable is touched.

  4. PVC-free jacket

    ECOHEMP is a jacket made of TPE-V and hemp fabric, and does not use PVC.

Where to buy

Place of purchase

Amazon
Amazon.co.jp (Cordial cables)
Online sales by instrument stores
  • Sound House
  • Miyaji Gakki

Case study

Case Study

We present the flow and the finished form in the form of reports. Each one states clearly whether it is based on our actual operations or is an example assumed from how such work is normally done.

Setting up cables and wiring at live venues
Example based on typical ways of working

Live sound cabling

Setting up cables and wiring at live venues

At live venues, cable faults cause noise or dropouts during the performance, and finding the cause takes considerable effort.

  1. Check the equipment to be used and the connection distance
  2. We prepare cables and lengths that suit the use
  3. Set up backups and inspection procedures
  4. Run a full check before production

ReportReport for this case

Flow
Check → align → inspection procedure → pre-launch check: this is how the wiring is put in order.
Deliverables
  • List of cables suited to each use and length
  • Spare preparedness
  • Inspection procedure
Points to confirm
  • Whether noise and audio dropouts during live performances have been eliminated
  • Whether spares can be supplied immediately
  • Whether inspection has become a habit
Setting up cables for each purpose at a recording studio
Example based on typical ways of working

Recording studio

Setting up cables by purpose in recording studios

In a recording studio, the cables vary in type and length, and you have to search for the right one every time.

  1. Identify the connections for each microphone, instrument, and piece of equipment
  2. We prepare cables for each use
  3. Make them distinguishable by length and purpose
  4. Replace items that have worn out

ReportReport for this case

Flow
Organize through: identify → standardize → distinguish → replace.
Deliverables
  • Cables by use
  • Rules for Telling Things Apart
  • Replacement record
Points to confirm
  • Has the time spent searching decreased?
  • Whether the right one is being used for the purpose
  • Whether any damaged items remain
Our work as the importer of Cordial, from import through to warranty
Example based on our own operating experience

As the importer of Cordial

Our work as the importer of Cordial, from import through to warranty

Here is an example from our own operations. To bring Cordial products to customers and dealers in Japan, we handle import, inventory, sales and warranty as one continuous process.

  1. Agree on terms with the manufacturer and for sales in Japan
  2. Prepare Japanese product information and pricing
  3. Hold inventory and deliver it to retailers and online sales channels
  4. Share the dealers and how to choose products that suit the intended use

ReportReport for this case

Flow
We handle import → inventory → sales → warranty as one continuous flow.
Deliverables
  • Product information in Japanese
  • Availability at retailers and online stores
  • Warranty and repair contact
Points to confirm
  • Whether sales are being halted because of stockouts
  • Is the product information up to date?
  • Whether warranty requests are honored promptly

Contact

For retailers, businesses and customers purchasing

We accept inquiries on specifications of the products we handle, consultations on purchasing, and applications for warranty and repair.

Inquiries About Exclusive Import Distribution Products