日本語A&M GROUP Official SiteProfessional AI Multi-AgentSound Engine DOMEarEffect

Brand — IGS Audio

IGS Audio

A Polish manufacturer of recording and mastering equipment. It makes tube, FET and optical compressors, equalizers and microphone preamps, as rack-mount units and as 500 series modules.

Country
Poland
Importer
A&M INVESTMENT INC.
Price list
Revised on March 1, 2026

In Japan

Handling in Japan

As IGS Audio JAPAN, A&M INVESTMENT INC. serves as the exclusive distributor in Japan, handling import, supply to dealers, and repair and inspection. Products can be purchased at music instrument stores and professional audio equipment dealers in Japan. We provide information on dealers carrying the products through the Japanese official website or by inquiry. Demo units are kept at dealers, and we do not lend them directly to individuals. Manuals are the manufacturer's English versions.

Rack

Rack type

A standalone piece of equipment that mounts in a studio rack.

Compressor

Compressors for mastering and mixing. They even out differences in volume and give the sound cohesion.

  • TUBECORE: A tube (Vari-Mu) stereo mastering compressor with M/S mode
  • ZEN: a mastering compressor that uses Zener diodes
  • V8 Compressor: A diode-bridge design. The signal path consists only of transformers and transistors
  • MULTICORE: a VCA multiband compressor that splits the signal into bands and compresses each
  • VOLF: A stereo FET compressor
  • One Leveling Amplifier: a tube optical compressor

Equalizer

An equalizer for mastering and mixing. It shapes the tone band by band.

  • Tilt n Bands: A tube stereo mastering equalizer
  • 825EQ: Tube dual-mono mastering equalizer. Stepped knobs let you recall settings accurately
  • iQ. Inductor Equalizer: a dual-mono parametric equalizer that uses inductors
  • Rubber Bands: a stereo passive vacuum tube equalizer

Microphone preamp

A tube microphone preamplifier used at the entry point of recording. It raises the microphone signal to a level suited to recording.

  • Double Triode Limiter: a tube microphone preamp combined with an optical limiter
  • Pure Tube Channel: a signal path made up only of input/output transformers and vacuum tubes, with a Hi-Z instrument input

Power supply and reverb

A power supply for the modules and an analog reverb. One is the foundation that runs the modules, and the other adds reverberation.

  • Panzer 500: A case and power supply with 10 slots that houses 500 Series modules
  • SPRINGTIME: an analog studio reverb with adjustable wet and dry levels for each channel

Modules

500 Series

Modules that plug into racks conforming to the 500 Series standard.

Compressor

Compressors of different types can be combined as modules. The combination can be changed within the rack to suit the purpose.

  • S-Type 500 VU: A VCA stereo bus compressor with a sidechain
  • ONE LA 500: A tube-based optical compressor
  • Tubecore 500: A tube (Vari-Mu) compressor
  • A-Type 525: VCR-type compressor with a discrete circuit
  • 576 Blue Stripe: FET compressor
  • Photon 500: An optical compressor that uses an LED
  • Alter 500: FET compressor

Equalizer

There are passive, inductor and parametric types. The character of how the tone is shaped changes depending on the type.

  • RB 500 ME: A stereo passive equalizer. Supports M/S processing
  • RB 500: A mono passive equalizer
  • 573EQ: Equalizer using inductors
  • EQM500: A mid-range passive equalizer. Boosts or cuts the vocal frequency range
  • iQ505: A full parametric equalizer with overlapping frequency bands

Microphone preamp

Transformer-type and tube-type microphone and instrument preamplifiers. They are used at the entry point of vocal and instrument recording.

  • NE573: A Class A transformer-based microphone preamplifier
  • 572 Red Stripe: Tube microphone and instrument preamp
  • Vanad 500: A transformer-based microphone and instrument preamplifier with a Hi-Z input

M/S Processor

Processes a stereo signal by splitting it into the center (Mid) and the left and right (Side). In mastering and mixing, it lets you adjust the stereo width and the center sound separately.

  • BISON 500: Includes a mixer that blends dry and wet signals. Lets you use the compressors you already own in parallel or M/S

Price

Price revisions

In response to rising parts procurement costs on the manufacturer's side, we revised the selling prices of all products effective March 1, 2026. The table below shows the recommended retail prices after the revision, including tax.

Price list

Price list (suggested retail prices, tax included)

Tubecore
734,800 yen
ZEN
671,000 yen
VOLF
618,200 yen
MULTICORE
JPY 734,800
V8 Compressor
687,500 yen
One Leveling Amplifier
JPY 409,200
Double Triode Limiter
JPY 524,700
Pure Tube Channel
JPY 259,600
Panzer 500
JPY 242,000
Tilt n Bands
687,500 yen
825EQ
JPY 881,100
Rubber Bands
539,000 yen
SPRINGTIME
818,400 yen
S-Type 500 VU
188,100 yen
ONE LA 500
JPY 235,400
RB 500 ME
250,800 yen
Tubecore 500
229,900 yen
NE573
JPY 195,800
A-Type 525
JPY 195,800
573EQ
JPY 227,700
576 Blue Stripe
JPY 204,600
572 Red Stripe
JPY 227,700
BISON 500
JPY 188,100
EQM500
JPY 188,100
iQ505
JPY 165,000
Photon 500
JPY 195,800
Alter 500
JPY 188,100
RB 500
JPY 188,100
Vanad 500
188,100 yen

Repair

Warranty and repairs

Initial defects (new, genuine domestic products)
Please contact the authorized dealer where you bought the product, or us, within 7 days of the purchase date (the delivery date for mail orders). We will check the condition of the product and respond accordingly.
Distributor warranty (new, authorized domestic products)
One year. Inspection and repair of natural failures are free of charge. Shipping to us is paid by the customer. Failures caused by usage are repaired for a fee.
Used products, genuine domestic models, after the warranty period
This is a paid inspection (estimate) and repair service. The inspection fee is JPY 10,000 + consumption tax (the same for rack-type units and the 500 series; it is also required if you cancel the repair). For repairs, we quote the cost of parts and labor.
Parallel-import goods
At the first registration, a support registration fee (20% of the suggested retail price at the time support is explained) is charged, and a paper registration certificate is issued. After that, support is provided on the strength of the certificate even if the owner changes. Inspections and repairs are charged.
Payment
Payment is by bank transfer. We begin the repair after confirming your payment.
Estimated period
  • Inspection and estimate: approx. 2 to 4 weeks
  • Repair: approx. 4 to 8 weeks
  • If parts must be ordered from the manufacturer: about 4 more weeks

Case study

Case Study

We present the flow and the finished form in the form of reports. Each one states clearly whether it is based on our actual operations or is an example assumed from how such work is normally done.

Proposing combinations of equipment for mastering
Example based on typical ways of working

Mastering equipment

Proposing equipment combinations for mastering

A mastering engineer is looking for equipment that gives the sound cohesion and breadth.

  1. Ask about the sound you want to achieve and the equipment you use now
  2. Consider the combination of compressor and equalizer
  3. Shape the stereo width with M/S processing
  4. Assemble it in the rack and begin operation

ReportReport for this case

Flow
We set it up through listening → combination → processing → integration.
Deliverables
  • Equipment combinations
  • Rack configuration
  • Warranty contact
Points to confirm
  • Did it come together as the intended sound?
  • Could it be combined with your current equipment?
  • Whether the warranty contact is clear
Setting up a home-studio recording environment by combining modules
Example based on typical ways of working

Build with the 500 series

Setting up a home studio recording environment by combining modules

People who record at a home studio want to set up a solid starting point for recording voice and instruments within limited space and budget.

  1. Ask what you will record and what equipment you have now
  2. Select the mic preamp and compressor modules
  3. Assemble it in the rack and arrange the wiring
  4. Reconfigure to fit the purpose

ReportReport for this case

Flow
We build the entry point for recording through listening → selection → assembly → reconfiguration.
Deliverables
  • Module combinations
  • Racks and wiring
  • Approach to recombination
Points to confirm
  • Whether it fit within the location and budget
  • Whether it suits what you are recording
  • Can uses be expanded through recombination?
Our work as the importer of IGS Audio, from import through to warranty
Example based on our own operating experience

As the importer of IGS Audio

Our work as the importer of IGS Audio, from import to warranty

Here is an example from our own operations. To bring IGS Audio products to customers and dealers in Japan, we handle import, inventory, sales and warranty as one continuous process.

  1. Agree on terms with the manufacturer and for sales in Japan
  2. Prepare Japanese product information and pricing
  3. Hold inventory and deliver it to retailers and online sales channels
  4. We also answer questions about usage, as the importer

ReportReport for this case

Flow
We handle import → inventory → sales → warranty as one continuous flow.
Deliverables
  • Product information in Japanese
  • Availability at retailers and online stores
  • Warranty and repair contact
Points to confirm
  • Whether sales are being halted because of stockouts
  • Is the product information up to date?
  • Whether warranty requests are honored promptly

Contact

For retailers, businesses and customers purchasing

We accept inquiries on specifications of the products we handle, consultations on purchasing, and applications for warranty and repair.

Inquiries About Exclusive Import Distribution Products