日本語A&M GROUP Official SiteProfessional AI Multi-AgentSound Engine DOMEarEffect

Support — Requirements

We turn the reality of your work
into requirements that can be developed.

From the questionnaire, materials, and interviews, we document how your operations actually run and the requirements. We take the document down to a level of detail at which the engineer who wrote it can build from it as is.

Questionnaire
Questionnaire
Analysis
Analysis of forms and documents
Specification
Requirements Definition Document

When

In situations like these

Requirements will not come together

There is something we want to build, but we can't put it into words. From a questionnaire and materials, we write out what you want to build in the language of your operations and shape it into a form engineers can design from.

  • Each stakeholder says something different
  • The handling of exceptions has not been defined

Estimates that do not line up

Even when you consult development companies, the estimates vary widely. Estimates vary because the written requirements are rough. With a requirements definition document of uniform granularity, each company's estimate can be compared on the same yardstick.

  • The premises differ from company to company
  • No baseline for comparison

We want to avoid rebuilding

After it was built, we found it was different from what we had expected. Most rework originates at the requirements stage. If exceptions and the criteria for judgment are confirmed in writing, mismatches after completion can be prevented.

  • A requirements misunderstanding occurred
  • Going back and forth on specifications took time

What we do

What We Provide

Questionnaire design

We prepare a questionnaire tailored to your operations and ask about everything without omissions. Because the questions are built around your work and formats, little gets missed, and the answers themselves become a draft of the requirements.

  • Question items for each task
  • Confirming exceptions and decision criteria
  • Organizing responses

Analysis of forms and documents

We collect the forms and templates in use and classify them by type. We group similar forms and tabulate the differences in their fields and decisions. This step determines how many systems need to be built and which parts can be shared.

  • Collecting forms
  • Interpreting items and calculations
  • Organization by type

Requirements Definition and Assessment

We put the requirements in writing and assess whether they can be realized. For each requirement, we assess whether it can be built, under what assumptions, and how much effort it would take, to serve as a basis for the development decision.

  • Definition of functions, screens and data
  • Feasibility assessment
  • Estimated effort

In depth

Misunderstandings of requirements are prevented
with a detailed written requirements document.

Most rework in development originates at the requirements stage. What is heard stays abstract when it becomes a specification, and interpretations diverge once building begins. Meaning drifts with each handover, and after completion people say, "This is not what we had in mind."

From questionnaires, materials, and on-site interviews, we document how the work is actually done and the criteria for judgment. Forms and documents are organized by type and broken down into input, judgment, and output stages, to a level of detail that the engineers who build the system can design from directly.

The engineer who wrote the requirements designs and implements the system. Misunderstandings caused by passing specifications back and forth do not arise by structure. In the staffing assessment for specialized professionals, this approach took the project from finalized requirements to operation on site in 1 month.

Case study

Case Study

We present the flow and the finished form in the form of reports. Each one states clearly whether it is based on our actual operations or is an example assumed from how such work is normally done.

Translate professional staffing-placement judgments into requirements detailed enough for development.
Example based on our own operating experience

Documenting requirements

Writing up professionals' staffing-allocation judgments
as requirements detailed enough to develop.

This is an example from our contract development work. In a professional organization, the task of judging each staff member's capacity for every case was being done by criteria held in the heads of experienced staff.

  1. Organize the prescribed forms by type, and confirm the actual state of the work and the requirements in writing through a questionnaire
  2. Separate the assessment into input, judgment and output stages
  3. We collect examples of experts' judgments and put the criteria into words
  4. Confirm in writing the exceptions and the situations where a person decides
  5. The engineer who wrote the requirements moves straight into design

ReportReport for this case

Flow
The same engineer carries through questionnaire → analysis of materials → documenting the decision criteria → confirmation → design.
Deliverables
  • Written document of operational reality and requirements
  • A list of decision criteria and exceptions
  • A requirements specification detailed enough that nothing is left unclear at the build stage
Points to confirm
  • Whether an experienced person can read it and say it matches their own judgment
  • Whether the handling of exceptions is documented
  • Is there a clear outlook for going live on site within one month?
Turning the rules for submission documents into requirements that can be checked against.
Example based on our own operating experience

Submission document requirements for bids

Turning the rules for submission documents
into requirements that can be checked.

This is an example from our own company. Bid submission documents come with detailed rules that differ by case, such as format, page limits, file names and preparing documents with the company name concealed, and a submission cannot be made if any of them is overlooked.

  1. Collect document rules from past public notices and bidding instructions
  2. We break the rules down into items that can be verified
  3. Document how to check amounts, dates, blank fields, and the like
  4. Build a cross-checking mechanism based on the source documents

ReportReport for this case

Flow
Proceed in this order: collecting the rules → breaking them down into items → documenting how to verify → a mechanism for checking against them.
Deliverables
  • List of document rules
  • Document of verification methods for each item
  • Requirements for the reconciliation mechanism
Points to confirm
  • Whether differences in the rules for each project are captured
  • Whether verification is done the same way by anyone
  • Whether items that require human judgment are separated out
Creating a requirements document you can hand to a development company, starting from the language of your operations.
Example based on typical ways of working

Requirements documents for placing orders

Requirements documents you can hand to a development company,
built from the language of your operations.

A logistics company wants to build an inventory management system, but has no one in-house who can write the requirements, and the proposals and quotes differ from one development company to the next.

  1. Collect the current forms and files, and organize their fields
  2. Ask about volumes, frequency and exceptions through a questionnaire
  3. Compile screens, data and exceptions into a requirements specification
  4. Re-obtain each company's quotation on the same document format

ReportReport for this case

Flow
Collect materials → questionnaire → requirements definition document → re-obtain estimates, to reach a state where an ordering decision can be made.
Deliverables
  • Requirements Definition Document and Screen List
  • Form analysis table
  • A table for comparing estimates
Points to confirm
  • Whether each company's quotation is based on the same assumptions
  • Whether the handling of exceptions is documented
  • Whether on-site staff can read it and find it convincing

Requirements

The engineer who writes the requirements
describes them in enough detail to develop from them directly.

Because the same engineers handle both requirements definition and development, requirements do not drift through back-and-forth exchanges of specification documents.

Deliverables

What we deliver

  1. Requirements Definition Document

    A document defining functions, screens, data and exceptions. It is written at a level of detail that the engineers who build the system can use directly in their design. In addition to screen and data definitions, it records how exceptions are handled.

  2. Form analysis table

    A table organizing forms and documents by type. It lists the items, input sources and decision criteria for each form, and separates the parts that can be standardized from those that are built individually.

  3. Feasibility assessment

    Difficulty of realization, assumptions, and estimated effort. We lay out the difficulty, assumptions, and estimated effort for each requirement, as material for deciding how much to build first.

Process

How to proceed

  1. Collecting Materials

    We collect your current formats, forms, and files. By gathering the formats, forms, and files actually in use, we can identify exceptions and items that interviews alone would not reveal.

  2. Questionnaire

    We ask about how your operations actually run through a questionnaire. The questions are tailored to your operations and cover volumes, frequency, decision criteria, and exceptions. Responses are provided in writing.

  3. Interviews

    Based on the responses, we confirm exceptions and the criteria for judgment. Using the answers to the questionnaire, we confirm with the person in charge, one by one, how exceptions are handled and what criteria are used for judgment.

  4. Documentation

    We compile the requirements into a requirements definition document for your review. The person in charge reads it, and we finalize it after correcting any discrepancies.

  5. Evaluation

    We assess the difficulty and effort of realization. For the confirmed requirements, we assess whether they can be built and how much work they will take, and connect this to the development plan.

Estimate

What Determines the Cost

We prepare a quote after asking about the following points. With the AI quote, the AI asks about the same points in turn.

  1. Scope of work

    The number of target tasks and the departments involved. The more tasks and departments there are, the more interviews and documentation are needed.

  2. Number of forms

    The number and types of formats and forms to be analyzed. Even when there are many formats, we keep the analysis effort down by grouping them into types.

  3. Amount of interviewing

    The number of people interviewed and the number of interviews. The more we hear from those who hold the decision criteria, the more reliable the requirements become.

  4. Level of detail in written documents

    The level of detail of the requirements definition document. It varies depending on whether it is broken down to a level that can be designed from directly, or limited to confirming the approach.

Why A&M GROUP

The engineer who receives your inquiry will go on to handle the development.

  1. There are no handovers between staff members.

    The engineer who did the interviewing designs and implements the system directly. Requirements do not drift through back-and-forth specification documents.

  2. We operate them every day in our own business

    We actually operate 8 AI systems that do the work of several thousand people in our own business, including the multi-agent system that oversees the operation of the entire business. Our advice comes from experience of running them, not from proposals on paper.

  3. We propose the suitable method, not only AI

    Where AI is not needed, we will tell you so. If an off-the-shelf tool is enough, we will propose that approach as well.

  4. We also handle operation and improvement after delivery.

    We run it in actual operation and take responsibility through to detecting faults and continuing to fix them. We operate our own 8 AI systems under this structure every day.

Operating scale — from system logs

AI that carries the work of thousands of people,
operated every day in our own business.

Every proposal is a method we have run and verified in-house. Our AI processes every day a volume of work that would require multiple departments if handled manually.

approx. 100,000cases/day

Checks bid notices published by government agencies and others 4 times every day, with AI judging deadlines, participation conditions, and fit with our company

1,108cases

Bidding projects whose deadlines and progress are managed by AI

4,084items

Orders, inventory, pricing, advertising, and finance on one platform

86functions

In-house system functions that can be run directly from AI assistants

8systems

AI systems we actually run in our own business

Values retrieved from each system's records (as of November 9, 2026). "Thousands of people" is a figure we calculated: we converted this workload into the effort it would take people to process it with the same tasks, and took the number of people needed to finish it within twenty-four hours. It is not a measurement by a third party.

View the workload breakdown

Contact

Please contact us about documenting requirements.

Choose a contact point and describe your request. Together with our AI guide, we will organize the details and prepare a rough estimate on the spot.

Request a quote for this plan